Sunday, July 15, 2012

How to perform TURP? (post) step-by-step operative urology series

How to perform TURP? (post) 
step-by-step operative urology series

this is a post for those who do not like to read presentation

TURP set

  • Lens
  • Resectoscope sheath 24-Fr  or 27-Fr.  (single flow or continous flow).
  • HF resection electrodes: band electrode & roller electrode (coagulation).
  • Ellic evacuator
  • Electrolyte-free and sterile irrigation fluid.
  • Lubricant.
  • Optional suprapubic catheter (12-Fr) for continuous irrigation.

                         Right position      (45 degrees)                               Wrong position (extended lithotomy)

Continence mechanism

The three components of the sphincter mechanism are:
Øbladder neck
Øintramural external sphincter (just distal to the verumontanum)
Ølevator ani.

Basic skills for TURP

Cutting a chip

1.lift the resectoscope to allow the loop to sink in
2. keep it level as you cut the chip
3.depress the sheath to cut off the chip.

The shape of the chip is like a canoe. It is as wide and deep as the loop, and its length is determined by the travel of the loop.

Cutting the chip off before the loop enters the sheath prevents any possible damage to the telescope.

Bleeding control

•Smaller vessel may be controlled by coagulating its mouth.

larger vessel is controlled by applying the loop just to one side of wall to seal the walls together.

•When artery points straight at you all you can see is a red blur.
•advance sheath, tilt it to squeeze vessel, coagulate just upstream.

If localization of bleeding site is difficult consider ‘Bouncing bleeding’. 

Prophylactic coagulation sites

Main Steps of TURP

1.Identification of landmarks.
2.Removal of most of adenoma (stepwise) by Mauermayer technique or Nesbit technique.
3.Tidying up & removal of apical tissue.
4.Catheter application

Initial steps & Identification of landmarks

•Lithotomy position.
•Blind trocar or visual insertion of the resectoscope sheath.
•Urethrocystoscopy with identification of verumontanum, prostatic urethra, bladder neck and ureteral orifices.

•The external sphincter is easily identifiable at the level of the membranous urethra.

•It is necessary to be aware of the position of the verumontanum to see that the lower part of the cut is not extending below this level, otherwise damage to the sphincter mechanism may occur.

Mauermayer Standard technique (1981)

•Resection in lobes (middle lobe & tissues lat. to veru. → Lt lobe→ Rt → lobe apical tissues).
•apical tissues last

•Resection begins at the proximal portion of the middle lobe at the 6 o’clock position.
•The resectoscope is placed just proximal to the verumontanum and the resection carried out always controlling the endpoint of each cut.

•Continue resecting the middle lobe from the 7 to 5 o’clock positions.

•Resection at both sides of the verumontanum with particular care of the position  of the external sphincter (do not exceed distal end of verumontanum).
•pull the resectoscope into the urethra, just distal to the verumontanum, and note that there is no falling and obstructing tissue.

Resection of Left lateral lobe (proximal part) in long cuts next to each other to achieve smooth surface (fossa).
•Which lobe first? depends on the preference of the surgeon.

Resection of Right lateral lobe (proximal part) in long cuts next to each other to achieve smooth surface (fossa).

•Shape of surface (fossa) after resection proximal part of both lateral lobes in long cuts.

•Resection of apical tissues carefully (do not exceed distal end of verumontanum)- finger in rectum can approximate the apical tissues.

Nesbit Standard technique (1943)

•Resection from proximal to distal (BN → midportion → apical tissue).
•apical tissues last.

1st stage: resect BN  

•Resect BN in quadrants starting at 12 o’clock (until see circular fibers of BN)

2nd stage: resect midportion in quadrants, (superiorly to inferiorly) (until see fibers of prostatic capsule)

(a): Rt lobe upper quadrant (12 to 9 o’clock)

(b): Lt lobe upper quadrant (12 to 3 o’clock)

(c): Rt lower quadrant (9 to 6 o’clock) & Lt lower quadrant (3 to 6 o’clock) 

3rd stage: resect apical tissues
Residual tissue is carefully cleared on both sides immediately lateral to veru (do not exceed distal end of verumontanum to preserve sphincter).

begin next to the veru → toward the 12 o'clock position

Catheter application

place a 20 F three-way catheter for drainage; can be inserted with the finger in the rectum, pressing the prostatic tissue up to avoid damage to the bladder neck and trigone.
The balloon is inflated to 20 mL or 30 mL
the catheter can be left at bladder neck or withdrawn in the prostatic fossa.

Balloon  catheter within the bladder (with traction on BN to contract the fossa)

this  is the preferred method by most of the surgeons because it allows the capsule to contract without much trauma to the urethra.

Balloon  catheter within the prostatic fossa 

some  surgeons advocate  that method to control bleeding (only for short time).
However, Prolonged traction with  the  balloon  in  prostatic  fossa  has the  risk  of  traumatic  injury & prevent fossa contraction leading to bleeding.

Skin traction

some  surgeons advocate  traction to be maintained by a gauze swab tied round the catheter and pulled back onto the glans penis (for short time to avoid ischemia).



Shankarabarathi said...

Awesome article! It's really informative. I'm rather impressed to read this nice content. Love this meaningful post. Thanks for this excellent information.
Hospitals in Chennai
pediatric neonatal surgeon

blueneem said...

Blue Neem Medical Devices Pvt. Ltd. is a medical device manufacturing company providing high quality medical devices in the field of Ureteral Stents, DJ Stents, Catheters, Variceal Multiband Ligator, Stone Baskets, Turp Loops, Biliary Stents, Urology Products,Nephrostomy Catheters, and Gastroenterology Products in India.
for more details:

blueneem said...

The first is known as a transurethral resection of the prostate (TURP). This is the commonest form of surgery used in BPH treatment and involves the removal of the inner core of the prostate. The procedure is performed under general anesthetic (or using a spinal anesthetic) and a wire cutting loop is inserted through the penis and urethra to remove tissue from the prostate. Patients will normally stay in hospital for one or two days for this procedure and, following surgery, will need to uses a catheter to drain the bladder for two or three days.

for more details:

Dr Njuma (Urology Resident, CMR) said...

Very informative and elaborate. Thanks for the presentation.

Nikotech said...

Nice and Detailed information about turp electrodes step by step process.

Post a Comment

Twitter Delicious Facebook Digg Stumbleupon Favorites More

Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Bluehost Review